Setek WiFi Extender Reset Process is used to restore the factory default settings of the extender; there are plenty of reasons why you might reset your device. If you have forgotten the password of the extender or facing any connectivity issue, slow internet speed etc. ; resetting the device can resolve maximum issues.
Setek WiFi Extender Reset Process:
Many extenders have reset buttons and many have reset pin holes. In the Setek extender, you will find a reset pinhole to reset it. Follow the given steps to reset the Setek extender.
- First of all, ensure that the extender should be turned on.
- Locate the reset pinhole on the extender.
- Take a thin paper clip and put it into the pinhole.
- Press and hold this clip until the light on the extender starts blinking.
- Once this light beacons solid or stops, the extender starts to reboot.
After resetting, you need to configure the extender to the router again. You can use the further steps to configure the extender.
How to Configure:
Now we discuss the easiest method to configure the Setek extender. Follow the steps:
- Position the extender at the halfway location between the router and the dead zone area.
- Connect the extender to the power wall outlet.
- Also, ensure the router is turned on.
- Press the WPS button on the extender.
- Within two minutes press the WPS button of an extender.
- After that wait till the light on the extender turns solid.
Once the light turn’s solid, your extender is connected to the router.
Pros & Cons
Before factory Setek WiFi extender reset, it’s important to weigh the pros and cons to determine if it’s the right choice for your situation.
Pros:
1. Resolve Connectivity Issues: A reset process can resolve several connectivity issues of the Setek extender.
2. Remove Custom Settings: Once you reset the Setek WiFi extender, all the custom settings or configurations will be cleared or removed.
3. Improve the Speed: Sometimes reset process can help to restore the optimal functionality of the extender, and improve the performance of the extender.
4. Resolve Technical Issues: Reset the Setek extender can also help to resolve the several minor issues.
5. Security: if you felt your WiFi network has been compromised, then reset the all the network to eliminate any unauthorized access.
Cons:
1. Loss of Custom Settings: It removed all the custom settings like specific SSID names and passwords or configurations. You need to set these again.
2. Time-Consuming Setup: After reset process, you will need to spend time to setup the extender again. It can be time consuming, if you are not familiar with the setup process.
3. Loss of Connection: If you reset your extender, then it will loss connection with router and does not received signals. Here you need to reconfigure it.
4. Potential for Interference: If you follow the incorrect reset process or press the reset button for too long. Then it can be increasing your problem.
Conclusion
In this blog, you have learned how to reset the Setek WiFi extender correctly, and how to configure the extender after reset process. Above all, we also discussed about the pros and cons of Factory resetting the extender; it helps you to determine if reset process is best choice for your current issue.
